	1-877-304-0294
HOME MIG WELDERS FLUX CORE 125 MIG 130 MIG 135 MIG 175 MIG /STICK 140 MIG / STICK 200 STICK WELDERS ARC 70 ARC 200 ENGINE DRIVE PLASMA CUTTERS CARTS/CABINETS Angled Cart Deluxe Cabinet WELD TABLES

MIG WELDER HELP - Flux Core 125

Northern Industrial Flux Core 125

Specs
Consumable Parts
Replacement Parts
Manuals
Videos

Specifications
Input Power Requirement	Single Phase 115 Volt
Rated Output	80 Amps @ 20% Duty Cycle
Max Amperage	125 Amps
Wire Feed Speed	80 to 420
Thermal Overload Protection	Yes
Weld Processes	Flux Core
Weight	38 lbs.
Supplied Gun	6 Foot Attached
Ground Cable & Clamp	6 Foot Attached
Regulator	None
Gas Valve	None
Contact Tips Included	Two (2) .030
Drive Roll Included	One (1) .030
Sample Wire Included	E71T-GS Flux Core Wire
Max Steel Thickness	3/16 Inch
Max Stainless Thickness	- -
Max Aluminum Thickness	- -

Consumable Parts
	Contact Tips .023 Contact Tip Part Number 00.00.00.000 .030 Contact Tip Part Number 00.00.00.000 .035 Contact Tip Part Number 00.00.00.000
	Flux Core Gun Nozzle Part Number 00.00.00.000
	Gas Diffuser Part Number 00.00.00.000
	Drive Roll Part Number 00.00.00.000
	Wire Inlet Guide Tube Part Number 00.00.00.000

Replacement Parts
	8 Inch Spool Adapter Part Number 2.05.17.008
	Hub Tension Hardware Washer Part Number 5.02.01.504 Bushing Part Number 2.05.17.010 Wing Nut Part Number 2.06.05.002
	Ground Clamp Part Number 1.05.80.04
	Drive Roll Tension Adjustment Hardware Thumb Knob Part Number 00.00.00.000 Spring Part Number 00.00.00.000 Bottom Cup Part Number 00.00.00.000
	Drive Roll Cover Part Number 2.20.09.601
	Drive Roll Tension Arm Part Number 00.00.00.000
	Wire Speed Control Knob Part Number 2.07.11.009

Manuals - (PDF's)

Quick Set-up Guide

Operator's Manual

Informational Video	Set-up Video
html 5 video player by EasyHtml5Video.com v2.8

Flux Core Wire Straightening	Joint Preperation

Untitled Document

MIG WELDERS | STICK WELDERS | ENGINE DRIVE | PLASMA CUTTERS | CARTS/CABINETS | WELD TABLES